View STTH1210_4102439.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STTH1210
Ultrafast recovery - high voltage diode
Main product characteristics
IF(AV) VRRM Tj VF (typ) trr (typ) 12 A 1000 V 175 C 1.30 V 48 ns
A
K
A K TO-220AC STTH1210D K TO-220FPAC STTH1210FP
A
Features and benefits

Ultrafast, soft recovery Very low conduction and switching losses High frequency and/or high pulsed current operation High reverse voltage capability High junction temperature Insulated packages: - TO-220Ins Electrical insulation = 2500 VRMS Capacitance = 7 pF - TO-220FPAC Electrical insulation = 2500 VRMS Capacitance = 12 pF
K A NC K
A
D2PAK STTH1210G
TO-220Ins STTH1210DI
Description
The high quality design of this diode has produced a device with low leakage current, regularly reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability. Such demanding applications include industrial power supplies, motor control, and similar mission-critical systems that require rectification and freewheeling. These diodes also fit into auxiliary functions such as snubber, bootstrap, and demagnetization applications. The improved performance in low leakage current, and therefore thermal runaway guard band, is an immediate competitive advantage for this device.
Order codes
Part Number STTH1210D STTH1210G STTH1210G-TR STTH1210FP STTH1210DI Marking STTH1210D STTH1210G STTH1210G STTH1210FP STTH1210DI
March 2006
Rev 1
1/11
www.st.com 11
Characteristics
STTH1210
1
Table 1.
Symbol VRRM IF(RMS)
Characteristics
Absolute ratings (limiting values at 25 C, unless otherwise specified)
Parameter Repetitive peak reverse voltage TO-220AC / D PAK / TO-220FPAC RMS forward current TO-220AC Ins TO-220AC / D2PAK IF(AV) Average forward current, = 0.5 TO-220FPAC TO-220AC Ins IFRM IFSM Tstg Tj Repetitive peak forward current Surge non repetitive forward current Storage temperature range Maximum operating junction temperature Tc = 125 C Tc = 40 C Tc = 95 C 120 80 -65 to + 175 175 A A C C 12 A 20
2
Value 1000 30
Unit V A
tp = 5 s, F = 5 kHz square tp = 10 ms Sinusoidal
Table 2.
Symbol
Thermal parameters
Parameter TO-220AC / D
2PAK
Value 1.9 5.4 3.1
Unit
Rth(j-c)
Junction to case
TO-220FPAC TO-220AC Ins
C/W
Table 3.
Symbol IR(1)
Static electrical characteristics
Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Tj = 25 C VR = VRRM Min. Typ Max. 10 A 3 30 2.0 IF = 12 A 1.40 1.30 1.8 1.7 V Unit
VF
(2)
Forward voltage drop
Tj = 100 C Tj = 150 C
1. Pulse test: tp = 5 ms, < 2 % 2. Pulse test: tp = 380 s, < 2 %
To evaluate the conduction losses use the following equation: P = 1.3 x IF(AV) + 0.033 IF2(RMS)
2/11
STTH1210 Table 4.
Symbol
Characteristics Dynamic characteristics
Parameter Test conditions IF = 1 A, dIF/dt = -50 A/s, VR = 30 V, Tj = 25 C IF = 1 A, dIF/dt = -100 A/s, VR = 30 V, Tj = 25 C Min. Typ 67 48 15 2 400 5 ns V Max. 90 ns 65 20 A Unit
trr
Reverse recovery time
IRM S tfr VFP
Reverse recovery current Softness factor Forward recovery time Forward recovery voltage
IF = 12 A, dIF/dt = -200 A/s, VR = 600 V, Tj = 125 C IF = 12 A, dIF/dt = -200 A/s, VR = 600 V, Tj = 125 C dIF/dt = 50 A/s IF = 12 A VFR = 1.5 x VFmax, Tj = 25 C IF = 12 A, dIF/dt = 50 A/s, Tj = 25 C
Figure 1.
P(W)
30
Conduction losses versus average current
=0.5 =1
Figure 2.
IFM(A) 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5
Forward voltage drop versus forward current
25
=0.1
=0.2
Tj=150C (Maximum values)
20 15 10
=0.05
Tj=150C (Typical values) Tj=25C (Maximum values)
T
5
IF(AV)(A)
0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
VFM(V)
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Figure 3.
Relative variation of thermal impedance junction to case versus pulse duration
Figure 4.
Relative variation of thermal impedance junction to case versus pulse duration
Zth(j-c)/Rth(j-c)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02
Single pulse TO-220AC TO-220Ins DPAK
Zth(j-c)/Rth(j-c)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2
Single pulse TO-220FPAB
tp(s)
1.E-01 1.E+00
0.1 0.0 1.E-03 1.E-02 1.E-01
tp(s)
1.E+00 1.E+01
3/11
Characteristics
STTH1210
Figure 5.
IRM(A)
35 30 25 20
VR=600V Tj=125C
Peak reverse recovery current versus dIF/dt (typical values)
Figure 6.
trr(ns)
500
Reverse recovery time versus dIF/dt (typical values)
VR=600V Tj=125C
IF= 2 x IF(AV) IF= IF(AV)
450 400 350 300
IF= 2 x IF(AV)
IF= IF(AV)
IF=0.5 x IF(AV)
250 200 150 100
IF=0.5 x IF(AV)
15 10 5
dIF/dt(A/s)
0 0 50 100 150 200 250 300 350 400 450 500
50 0 0 50 100
dIF/dt(A/s)
150 200 250 300 350 400 450 500
Figure 7.
Qrr(C)
3.5 3.0 2.5
VR=600V Tj=125C
Reverse recovery charges versus dIF/dt (typical values)
IF= 2 x IF(AV)
Figure 8.
S factor
3.0
Softness factor versus dIF/dt (typical values)
IF = 2 x IF(AV) VR=600V Tj=125C
2.5
IF= IF(AV)
2.0
2.0
1.5 1.0 0.5 0.0 0 50 100 150 200
IF=0.5 x IF(AV)
1.5
dIF/dt(A/s)
1.0
dIF/dt(A/s)
350 400 450 500
0 50 100 150 200 250 300 350 400 450 500
250
300
Figure 9.
Relative variations of dynamic parameters versus junction temperature
Figure 10. Transient peak forward voltage versus dIF/dt (typical values)
VFP(V)
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 25 50 75 100 125
QRR tRR Sfactor IF = IF(AV) VR=600V Reference: Tj=125C
45 40 35 30 25 20
IRM
IF = IF(AV) Tj=125C
15 10
Tj(C)
5 0
0 100 200
dIF/dt(A/s)
300 400 500
4/11
STTH1210
Characteristics
Figure 11. Forward recovery time versus dIF/dt (typical values)
tfr(ns)
700
IF = IF(AV) VFR = 1.5 x V F max. Tj=125C
Figure 12. Junction capacitance versus reverse voltage applied (typical values)
C(pF)
100
F=1MHz Vosc=30mVRMS Tj=25C
600
500
10
400
300
dIF/dt(A/s)
200 0 100 200 300 400 500
VR(V)
1 1 10 100 1000
Figure 13. Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, ecu = 35 m)
Rth(j-a)(C/W)
80
DPAK
70 60 50 40 30 20 10
SCU (cm)
0 0 5 10 15 20 25 30 35 40
5/11
Package information
STTH1210
2
Package information
Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 Nm (TO-220AC, TC-220Ins, TO-220FPAC) Maximum torque value: 0.7 Nm (TO-220AC, TO-220Ins, TO-220FPAC) Table 5. T0-220AC dimensions
DIMENSIONS REF. Millimeters Min. A
H2 OI L5 L7 L6 L2 C A
Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409
Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40
4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00
C D E F F1 G
F1
L9 L4 F
D
H2 L2
M E
16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93
0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154
L4 L5 L6 L7 L9 M Diam. I
G
2.6 typ. 3.75 3.85
0.102 typ. 0.147 0.151
6/11
STTH1210 Table 6. T0-220Ins dimensions
Package information
DIMENSIONS REF Millimeters Min. A a1 a2 B b1 b2 C c1 c2 e F OI I4 L l2 M 13.00 10.00 0.61 1.23 4.40 0.49 2.40 4.80 6.20 3.75 15.20 3.75 14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 5.40 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.189 0.244 0.147 Max. Min. Inches Max. 0.625 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.212 0.259 0.151
15.90 0.598
15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 2.60 2.95 1.70 0.104 0.044 0.102 0.116 0.066
7/11
Package information Table 7. T0-220FPAC dimensions
STTH1210
DIMENSIONS REF Millimeters Min. A
A H B
Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409
Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4
4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10
B D
Dia L6 L2 L3 L5 F1 L4 D L7
E F F1 G G1 H L2
16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20
0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126
F G1 G
E
L3 L4 L5 L6 L7 Dia.
8/11
STTH1210 Table 8. D2PAK dimensions
Package information
DIMENSIONS REF. Millimeters Min. A
A E L2 C2
Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126
Max 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20
4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40
A1 A2 B
D
B2 C
L L3 A1 B2 B G A2 2mm min. FLAT ZONE R
C2
C
D E G L
V2
L2 L3 M R V2
0.40 typ. 0 8
0.016 typ. 0 8
Figure 14. D2PAK footprint (dimensions in mm)
16.90
10.30 1.30
5.08
8.90
3.70
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
9/11
Ordering information
STTH1210
3
Ordering information
Part Number STTH1210D STTH1210DI STTH1210FP STTH1210G STTH1210G-TR Marking STTH1210D STTH1210DI STTH1210FP STTH1210G STTH1210G Package TO-220AC TO-220Ins TO-220FPAC D2 D2 PAK PAK Weight 1.86 g 1.86 g 2.2 g 1.48 g 1.48 g Base qty 50 50 50 50 1000 Delivery mode Tube Tube Tube Tube Tape & reel
4
Revision history
Date 02-Mar-2006 Revision 1 First issue. Description of Changes
10/11
STTH1210
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11

▲Up To Search▲

Price & Availability of STTH1210

	To Download STTH1210 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .